-
Ceramic Speed OSPW for SRAM RIVAL AXS
589,00 €OSPW for SRAM Rival AXS
The Oversized Pulley Wheel System for SRAM Rival AXS features a 15-tooth upper and 19-tooth lower pulley wheel setting, for maximum efficiency. The handbuilt OSPW System has two spring tension settings, that allows customised setup based on riding conditions.
-
Ceramic Speed OSPW for Shimano Dura Ace 9200 and Ultegra 8100 Series
589,00 €OSPW for Shimano Dura Ace 9200 and Ultegra 8100
The Oversized Pulley Wheel System for Shimano Dura Ace 9200 and Ultegra 8100 with integrated stop tower for simple installation and durability.
The CeramicSpeed Oversized Pulley Wheels System has been proven to be the fastest pulley system in the world.
CeramicSpeed OSPW Systems are an industry leading product, chosen by World Champions and top athletes around the world.
This OSPW System has handbuilt CeramicSpeed Bearings installed in each pulley and comes with a 4 year warranty as standard and a lifetime warranty when choosing coated or SLT bearings.
Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimisation of the rear derailleur. The upper and lower oversized aluminium pulley wheels come fitted with either standard or coated CeramicSpeed Bearings.
Please note while there are visual similarities in the 9100 Series OSPW and 9200 Series OSPW, the spring tension settings, rotation stop tower placement, and mounting pin depth are slightly repositioned and as such the systems are not cross compatible.
For 8100 derailleurs, the cage uses the factory derailleur body washer. 9200 derailleurs will require the new included derailleur body washer.
-
Ceramic Speed BB86 SRAM DUB alternative Coated MTB
389,00 €The new SRAM DUB crank standard, built on a 28.99 spindle, allows for a more contamination resistant BB design, while retaining the ultra-efficient & long-lasting qualities CeramicSpeed Bottom Brackets are known for.
With an integrated dust cover for all models, a snug & secure fit that also fully protects the face of the bearing delivers exceptional performance without any sacrifices. CeramicSpeed hand-built bearings carry the load from crank to frame with un-paralleled durability & efficiency.
-
Ceramic Speed BB30 SRAM DUB alternative Blk Coated
389,00 €These hand built bearings are specially developed for off-road performance. The bearings offer extreme durability and high performance efficiency and are developed specifically for DUB 28.99 cranks.
These bottom brackets are equipped with coated bearings. The coated bearings utilize the highest quality CeramicSpeed ceramic balls, running on hardened-steel races with a 3-micron thick metallic coating making the races corrosion resistant, harder and smoother, increasing service life and reducing friction.
-
Ceramic Speed UFO Racing Chain KMC 12S
139,00 €Due to its unique optimisation treatment, CeramicSpeed’s Ultrafast Racing Chain saves you watts and improves your performance with free speed and unparalleled low friction. Our ultrafast racing chains are carefully selected from high quality suppliers and optimised by hand in Denmark.
This ultrafast chain has been optimised for all 12-speed drivetrains and is compatible with all 12 speed group sets, including SRAM Red and Force AXS.
CeramicSpeed UFO Racing Chains can save you between 2–5 watts on a distance of 650 km/400 miles. Apply CeramicSpeed UFO Drip after 650km to maintain your peak chain optimization over the life of the chain.
Be aware that the UFO treatment is not optimised for wet and muddy conditions, which might cause corrosion on the chain. Read more about this in the maintenance tab.
-
Ceramic Speed UFO Drip – New Formula
39,95 €UFO Drip – New Formula
One of the 10 products that senior tech editor Dave Rome of CyclingTips loved in 2021
This new and improved formula of the CeramicSpeed UFO Drip Chain Coating is even faster and longer lasting than the first formula.
The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula. For wet conditions, the chain must be dried following the ride and a fresh coating of UFO Drip applied to ensure the best protection and continuing optimization
- 180ml / 6oz bottle contents
- Up to 300 km. per coating
- Up to 35 coatings per bottle
- Over 15% faster than previous formula
- Increased temperature stability – apply between 5-35oC / 41-95oF
-
Ceramic Speed UFO Clean Drivetrain
UFO Clean Drivetrain
The CeramicSpeed UFO Clean Drivetrain thoroughly removes grease and grime from all drivetrain components. The unique properties dissolve wax from internal rollers, and all surfaces of chain links.
UFO Clean Drivetrain is designed and formulated to clean and prepare chains for wax coatings and uses the same formula as we at CeramicSpeed use internally to prepare our UFO Chains.
This is a non-toxic and biodegradable formula – environmentally friendly and safe.
- 180ml / 6oz bottle contents
- Up to 300 km. per coating
- Up to 35 coatings per bottle
- Over 15% faster than previous formula
- Increased temperature stability – apply between 5-35oC / 41-95oF
-
Ceramic Speed UFO Grease
19,95 €All Round Grease: Designed to suit the maintenance of CeramicSpeed Bearings, the CeramicSpeed All-Round Grease maximizes your bearings’ lifetime and performance. This type of grease is a low to medium viscosity lubricant and works as the best compromise between friction influence and lifetime. We recommend it for optimal use in dry and sunny weather conditions, where no or very little contamination threatens the bearing. The application covers mostly road riding conditions, however it can be used off-road in the same weather settings, on all types of CeramicSpeed Bearings. When lubricating your bearings, we recommend a fill rate of 60-80%.